Author Topic: [PC] Fallout 4 Settlements +Boundaries  (Read 10086 times)

0 Members and 1 Guest are viewing this topic.

Offline Mikemc

  • Newbie
  • *
  • Posts: 39
[PC] Fallout 4 Settlements +Boundaries
« on: December 14, 2015, 02:33:27 am »
Here is an overhead view of the Covenant settlement, with a rough boundary drawn around it. I took this to aid in deciding were to place new objects, walls etc. I invite everyone to participate in this idea! Each map should have either the whole area before scrapping, or have the large debris, such as houses, cars, etc.. removed.

Naming could be like this:
"[Settlement name]" - As it was when you found it.
"[Settlement name] Clean" - All scrappable items cleared.
"[Settlement name] Empty" - Used a mod and removed absolutely everything.

Here is how I took the photo:

** Remember to use a save that is separate from your main saves, just in case!

Wait for a clear day or use a console command / mod to remove the fog.
Enter first-person view.
Open the console and type: tfc [enter] to activate Free Camera mode. Close the console.
Fly up to a good vantage point. Many screenshots may be required, then stitched together as best you can.
Open the console and type: tm [enter] to remove the HUD elements.
** This will also hide the console, so take the shot, then enter the code again before moving.

To get the boundaries:
*** If you activate Build Mode while using Free Camera mode, you may lose the use of your mouse wheel. Restarting the game will fix it.

While on the ground and not in Free-Cam mode, activate build mode (workshop) to display the green boundary.
Open the console and type: tfc [enter] to activate Free Camera mode.
Fly up and either take multiple shots or just get one big one from far away.
In an image editor, compare the boundaries image with your map & draw them out as best you can.

Interiors are more difficult as the clipping causes objects to vanish from view, and rooms may not render.
« Last Edit: December 14, 2015, 02:35:28 am by Mikemc »

Offline Trop

  • Hero Member
  • *****
  • Posts: 849
Re: [PC] Fallout 4 Settlements +Boundaries
« Reply #1 on: December 14, 2015, 08:44:16 pm »
This is largely what I did with my Aidyn Chronicles maps.  Manipulating the camera to float over the 3D environments so I could stitch up a basic map to then write over.  This is a LOT more work then it seems at first, 3D landscapes do not agree with screenshot mapping even when you do have camera control.  I won't spoil all the grief waiting for you on a project like this but I will say don't stress the borders.  If two things don't line up right screw it and just mash em together.